Post on Forum | My Forum Contribution | Forum Home
This forum post does not exist or has been removed by Administrator.
Jimmywick says
November 08, 2021 at 09:37 PM
Please check the below solution for this: 1) If the new ram was not seated properly, it burns out the motherboard and/or the ram. 2) If the slots are dusty, then dust gets in there and makes things not work...sometimes simply by interfering with seating the RAM module fully in the slot. 3) Electrostatic discharge damaged the motherboard and/or RAM as part of this process. Wearing an ESD wriststrap may be overkill, but be sure to at least touch a ground point immediately (like the power supply of a plugged in PC) before touching ram or the motherboard, especially in the Winter and also especially if you are seated on a plastic chair on a plastic floor mat. Hope this helps, J Wick