Post on Forum | My Forum Contribution | Forum Home
This forum post does not exist or has been removed by Administrator.
David Boon says
April 14, 2021 at 06:09 PM
Option 1: HP auto wireless connect Some newer printers can connect your printer to your wireless network automatically, but without any cables or enter your wireless network settings. To use this method, not only your printer should be a newer model but also your computer has to meet the following requirements. Your computer uses Windows 7/8/10. Your computer uses a wireless connection to your network and the computer can control the wireless adapter. Your computer uses a dynamic IP address. (How to check your IP address) Now let’s start! 1) Search and download the printer software on the official website. You have to identify your printer to find the right one. If you can’t find it, you can consult customer service. 2) Run the software. 3) Turn on the printer. Note: The printer will be in HP Auto Wireless Connect mode for two hours. So you’d better finish the whole process within two hours. 4) In your computer, follow the on-screen instructions until you are prompted to Connection Type. 5) Select “Wireless”, then click “Yes, send my wireless settings to the printer (recommended)”. The wording will vary depending on your printer model and computer operating system. 6) Wait for the connection and then finish the setup process by following the rest of the on-screen instructions. I hope these steps will be helpful! David Boon